The role of metal separators:
Detection and separation of all metals mixed in plastic materials, including ferrous and non-ferrous metals. Because of the old material crushing in the recovery process will be mixed in metal magazine into production accidents, increase the number of maintenance and downtime, resulting in increased costs, and affect the production efficiency, can be directly installed in the discharge port and single use injection molding machine under.
Performance characteristics of metal separator:
1. test boring temperature: less than 80 degrees, the temperature exceeds this range, optional special high temperature option;
2. sets of test coils, controllers, separation devices in one, easy to install and use;
3. test material characteristics: dry, good flow, no conductivity, particle size is less than 8mm;
4., through the elimination device for rapid elimination, can minimize material loss;
5. simple installation, easy to operate;
The 6. controller can be installed at the detection position 10m;
7., mainly used to detect loose particles of particles (<8mm) gravity gravity way feeding occasions, can be used in the plastics industry, food industry, chemical industry.

技术参数表 Specifications

Specifications, shapes and colours are subject to change without prior notice.